QaromaShop Pre Stretched, 150W, 20mm Heater Coil (for Taroma Lite Plus & Taroma 3.0) – AUS

QaromaShop Pre-Stretched 150W, 20mm Heater Coil (for Taroma Lite Plus & Taroma 3.0)
This coil is pre-stretched slightly longer specifically for use with the Taroma Lite Plus. It also heats up slightly faster than standard QaromaShop coils.

1. Press/compress the coil slightly, like a spring, just enough to allow the top cap to be screwed on completely.
2. Screw on the top cap, then release the compression of the coil.

Refer to the pictures above for guidance.

Please double-check if your coil pinout matches ours. This product is for 240V only.

If you are unfamiliar with the various pinouts available on the market, we strongly recommend purchasing the full kits instead. Do NOT use this with incompatible controllers as doing so will void all warranties.

Our Coil Pinout:
Coil (Male 5-pin XLR connector):

• PIN 1 = TC-
• PIN 2 = TC+
• PIN 3 = GND
• PIN 4 = AC-
• PIN 5 = AC+

Included:

• 1 x QaromaShop Pre-Stretched 150W 20mm Coil (240V only)

No warranties or returns available.