Innokin CoolFire Z80 Mod with Zenith II Tank Starter Kit

The Innokin CoolFire Z80 Vape Kit includes the CoolFire Z80 Mod and the Zenith II Tank in a ultra portable starter kit. The CoolFire Z80 features an incredibly compact size that is constructed with metal alloy and leather for a more comfortable grip. Firing up to 80 Watts the Innokin Coolfire Z80 requires (1) High amp 18650 battery that may be quickly charged via the USB Type-C charging port.
Inheriting the new FØ mode the CoolFire Z80 can now be adjusted with frequency (Hz). Utilizing the FØ mode helps in extending the coil life with every vape. The Coolfire Z80 also features the all new Refresh feature which allows you to manually refresh the coil between hits providing better flavor and wicking.

What is FØ mode:

FØ uses alternating current (AC) to produce a waveform that runs continuously while you vape. This is possible by sending an electrical output in a much more precise and efficient way through the coil.

You can adjust the hertz output to match your coil and e-liquid. When properly matched to your atomizer, FØ will extend coil life, provide smoother heat transfer, and even enhance specific flavors in e-liquid. AC will heat your e-liquid at a gradual rate, ensuring that it does not burn and produce a bad taste, so many of us have experienced.

What is Refresh mode:

Refresh is a new feature that allows you to manually refresh the coil between hits to provide better wicking, bringing in flavour to extend the coils life. Like Coil+, Refresh does this by running at 40% of your set wattage, drawing in more liquid.

Quick Links:

Our Premium e-Liquid
Replacement Atomizer Heads

Features and Specs:

Innokin Coolfire Z80 Mod:

• 4th Gen Vaping Technology
• Dimensions: 83.55mm x 38.3mm x 27.6mm (without tank)
• Resistance Range: 0.1 – 3.5Ohm
• Output Wattage: 6 – 80Watts
• Output FØ (Frequency): 20Hz – 100Hz
• Instant Firing Speed: 0.0003s
• 510 Threaded
• Power Mode, FØ Mode, Refresh Mode
• Metal Alloy and Leather Construction
• Display Screen
• Requires (1) 18650 High Amp Battery (Sold Separately)
• Type-C USB Charging Port

Zenith II Tank

• Diameter: 25.5mm
• E-Liquid Capacity: 5.5ml
• Top Fill Twist Lock Design
• Glass Tank
• Airflow Control
• Designed for both MTL and DTL users
• 510 Threaded Connection
• Includes (1) Innokin 0.8ohm MTL Zenith Atomizer Head
• Includes (1) Innokin 0.3ohm RDL Mesh Zenith Atomizer Head

---

1 x Innokin Coolfire Z80 Mod
1 x Innokin Zenith II Tank
1 x Innokin 0.8ohm MTL Zenith Atomizer Head
1 x Innokin 0.3ohm RDL Mesh Zenith Atomizer Head
1 x Spare Drip Tip
1 x Spare Replacement Glass
1 x USB Type-C Charging Cable

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you’re using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Battery Safety Warning: Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire. Store your batteries away from the sun and heat to prevent overheating your batteries. Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V. myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.